Construction continues to see. If you want to stan

2022-07-22
  • Detail

In the daily decoration process, masonry is usually a systematic project with wide coverage and heavy workload. Visible and invisible projects will be involved, such as the waterproof treatment of kitchen and bathroom, and the tiling of walls and floors, which belong to the scope of work of plasterers. From mending seams on the wall to tearing down walls and building walls, a detail that is not done well may lead to problems in later residential use, so standardized construction and technology are the lifeline of construction security. In this issue of "construction Lianliankan", the reporter will analyze the brickwork construction of regular home decoration companies to netizens. After reading it, you will know that if you want to standardize the process, brickwork must do this

this afternoon, the reporter went to a construction site in Lianmeng Jiayuan on Hongcheng road with the teachers and students of our Aijia decoration university to have a class on the norms of masonry technology. Pay attention to the laying of tiles. The tiles on the living room floor of the construction site have been completely paved. Knowing that the students from the decoration university are coming to the site, the masters deliberately left some bricks not pasted. Next, let's take a look at the points that should be paid attention to in tile laying. The most important requirement for tiling is “ Flat ”, Therefore, all work is carried out around this requirement. When entering the site, the Mason should be positioned, and the horizontal line should be snapped on the wall, 1m away from the ground. The height of the floor tile in the living room should also be set, as well as the height of the threshold of the entrance and balcony. A series of data should be recorded, and the subsequent construction can be followed. Then check the horizontal height. The floor height of the living room should be flush with that of the room, and the kitchen, bathroom, balcony and other places are usually slightly lower than these two places. The thickest cement mortar measured shall not exceed 5cm, and the exceeding position shall be filled first, so as to avoid hollowing in paving. Before tiling, the model and size of the bricks should be checked, and they should be soaked in the brick soaking box for 2 hours before paving. The tiles at the external corner must be poured 45 DEG; Corner cutting shall be carried out in the box specially used for cutting to avoid damaging other objects. Before paving, we should also make a reasonable brick layout plan, taking into account the saving of materials and aesthetics. During the paving process, it is necessary to hang lines for construction to keep horizontal and vertical. Needless to say, it is also necessary to pay attention to the flatness of the four corners as one, and the brick joints are consistent. It is also necessary to clean the brick joints and brick surface cement in time to keep them clean. These construction details have been listed as the terms that workers must abide by in regular home decoration companies. In this way, the quality inspection department also has specifications to follow during the later inspection. In addition, some detailed processes are particularly important. For example, wall tiles must be pressed against floor tiles in the kitchen and bathroom space, that is to say, the last piece of wall tiles should be left blank when paving, and then be filled according to the size after the floor tiles are paved, so that the aesthetics can be guaranteed. Self decoration owners should pay particular attention to this point, because some plasterers are used to it and don't pay much attention to these details. On the wall near the ground of the hall, we will see a part of the depression. This depression is for the foundation line to be flush with the wall in the future, so that the cleaning can avoid the dead corners that are difficult to clean

the horizontal line snapped on the wall is clearly visible

the external corner tiles should be cut in a special box to avoid secondary pollution

this is a bubble brick box specially used for soaking bricks

the paved floor tiles should be protected so that the carpenters and painters will not cause damage in the future

and after pasting the last brick, the upper mouth should be pressed evenly with cement to avoid the false upper mouth of the ceiling

北京儿科医院

青岛男科医院

郑州乳腺医院

广州胎记医院

Copyright © 2011 JIN SHI